1. Include the tanks in a regular inspection program. Evaluate their condition and replace if necessary.
2. Fill the tanks only half full with leach material.
3. Keep the material completely submerged in solution.
4. Install a…

• Replace the existing copper and carbon steel hydrogen pipeline with ¾-inch schedule 40 stainless steel.
• Reroute the new hydrogen line in the preferred location.
• Locate new hydrogen shut-off valves in a more convenient…

Normally hydrogen fires are not extinguished until the supply of hydrogen has been shut off due to the danger of re-ignition and explosion. During a gas leak/fire, it is important to shut off the source of the hydrogen if it is safe to do so. If…

1. The dilution water for making a polythionic acid aqueous solution was changed from industrial water to pure water to lower the chlorine concentration in the piping.
2. Water that accumulated in the drain was removed before heating…

• Verify that all PRDs contain fuse-backed adapters.
• Explore elimination of rupture disk PRDs and substitution of spring-style relief valves.
• Develop new hydrogen unloading procedure using a written checklist. * Add…

Mounting hardware incorporated polymeric braces not suitable for long-term exposure to sunlight and temperature extremes. With time, the polymeric materials had disintegrated, allowing the mounting brackets to become loose. In addition, the…

1. Carbon steel Nelson curve methodology cannot be depended on to prevent HTHA equipment failures and cannot be reliably used to predict the occurrence of HTHA equipment damage. Revisions to recommended practices should be considered…