Skip to main content

HIAD Facility - Operational Condition: Abnormal


The event occurred at a company producing machines for water treatment for the food industry.A pressurized tank exploded killing two workers and shaking windows and ceilings at neighbouring companies…
At approximately 8:45 a.m. an employee was troubleshooting a thermal chamber, evaluating a Hydrogen on Demand (HOD) unit. The chamber was reported inoperative that morning. Two units were being…
The accident occurred when a welder belong to a sub-contractor company was working on tank roof. The zeolite crystallization tank was being cleaned out with approx. 20% sulfuric acid. It was not…
There was a massive explosion at one of the generator-turbine units of a coal-based power station. Undetected hydrogen leak from the generator was identified as a major trigger.According to the news…
A process operator was working in the collaring/ decollaring area of a mechanical workshop. An electric cross cut saw was used to make two diagonal cuts in the collar of a hydrogen cylinder before…
Workers were connecting a compressed hydrogen cylinder, when a release of hydrogen occurred within a safety-box for flammable gases. During the emergency response procedures, the explosive atmosphere…
The event occurred during the disconnection of the hydrogen compressor for maintenance.Two deaths and three injured workers were the consequences. The cause(s) of the event are unknown.
The accident occurred during the maintenance of a sulfuric acid storage tank in an industry for the fertilizers production. The maintenance works consisted in cutting operations (to remove some…
An operator had just replaced the ignition port cover on a hydrochloric acid plant burner. Normal start-up was continued by closing the drain valve in the product run off line and opening the…
Chlorine was released in the liquefaction unit of a chlorine electrolysis plant, due to the rupture of a pipe. During the re-start phase of an electrolysis workshop in a chemical plant, chlorine (…
Lightning caused fires at plant near Hamburg after igniting a hydrogen mixture release through a ventilation pipe
Two mechanic workers had picked up a work permit for the removal of filters from a hydrogen line. An operator also visited the scene and answered the mechanics question as to whether the line should…
The fire occurred in the unit for the production of the hexamethylenediamine (HMD). The process is based on the hydrogenation of the adiponitrile [(CH2)4(CN)2]A jet fire of hydrogen was generated…
A jet flame occurred in a diesel distillation unit. It was caused by the release and ignition of hydrogen from the low-pressure (60 bar) section of a the unit. It occurred during maintenance works…
Fire on a filter of an autoclave. The event occurred in a plant for the production of plastics. After catalytic synthesis of amines, the filter of the autoclave was taken out for cleaning. During…
The event occurred in an alkylation reactor. Due to the rupture of a pipe (probably due to material failure), a power failure took place and the plant was automatically put in hot-stand-by mode. This…
A fire broke out on a transformer transforming 225,000 V into 15,000 V in a metallurgical plant. This transformer supplies electrical power the site and to a neighbouring factory. In the following…
As the airship approached the docking mast, it performed a sharp turn to face into the wind, which was shifting. The engines were run at full speed astern for about a minute to slow the airship. Dust…
The broke out at a hydrogen compressor of the reforming unit of the refinery. Following the safety procedures, the emergency stop of the unit was activated and the unit was decompressed using a…
A release of hydrogen occurred during the filling of a 28 bottles rack. A worker decided to move the rack from one station to another, due to works ongoing nearby. This movement, even though the hose…
Subscribe to Abnormal
We are professional and reliable provider since we offer customers the most powerful and beautiful themes. Besides, we always catch the latest technology and adapt to follow world’s new trends to deliver the best themes to the market.

Contact info

We are the leaders in the building industries and factories. We're word wide. We never give up on the challenges.

Recent Posts