| A Cellular Ceramic as a Catalyst Support for Radiolytic Gas Recombination Devices |
2020 |
Journal Article |
P. Costa, G. Usai, A. Re, M. Manfredi, G. Mannino, C. Bertea, E. Pessione, R. Mazzoli |
radiolysis, recombiner of hydrogen and oxygen, platinum catalyst, cellular ceramic |
| A COMPARATIVE STUDY OF HYDROGEN STORAGE AND HYDROCARBON FUEL PROCESSING FOR AUTOMOTIVE FUEL CELLS |
2016 |
Book |
S. Kazemiabnavi, A. Soundararaj, H. Zamani, B. Scharf, P. Thyagarajan, X.L. Zhou |
|
| A comparative study on the difference of CFD simulations based on a simplified geometry and a more refined BIM based geometry |
2020 |
Journal Article |
F. Xu, J. Yang, X. Zhu |
pedestrian wind environment, natural ventilation, performance |
| A HYDROGEN COMPATIBILITY AND SUITABILITY EVALUATION OF THE SEAMLESS STEEL TUBE 4130X |
2016 |
Conference Paper |
J. Zhai, B. Shou, H. Wang, T. Xu, G. Ma, L. Gui |
Standardized test, Hydrogen storage, Hydrogen safety, Hydrogen, embrittlement, 4130X |
| A NUMERICAL SIMULATION OF ANALYSIS OF BACKFIRING PHENOMENA IN A HYDROGEN FUELLED SPARK IGNITION ENGINE |
2016 |
Book |
K.A. Subramanian, B.L. Salvi |
|
| A Study on the Prediction of the Temperature and Mass of Hydrogen Gas inside a Tank during Fast Filling Process |
2020 |
Journal Article |
J. Li, N. Myoung, J. Kwon, S. Jang, T. Lee |
compressed hydrogen storage, fast filling, thermal theory, simulation validation, Hydrogen safety, high-pressure, storage cylinder, rise, system, state |
| A theoretical analysis of temperature rise of hydrogen in high-pressure storage cylinder during fast filling process |
2020 |
Journal Article |
J. Li, N. Myoung, J. Kwon, S. Jang, T. Lee, Y. Lee |
compressed hydrogen storage, fast filling, experimental analysis, thermal theory, temperature rise, Hydrogen safety |
| A well-resolved numerical study of a turbulent buoyant helium jet in a highly-confined two-vented enclosure |
2020 |
Journal Article |
E. Saikali, A. Sergent, Y. Wang, P. Le Quere, G. Bernard-Michel, C. Tenaud |
convection, emptying-filling box, air/helium mixture, turbulence, direct numerical simulations, Hydrogen safety, large-eddy simulations, fluid-mechanics, thermal plume, convection, flow |
| An experimental investigation of detonation limits in hydrogen-oxygen-argon mixtures |
2016 |
Journal Article |
H. Wu, S. Zhang, X. Li, S. Liu, L. Liang |
detonation limits, Hydrogen, velocity deficits, Safety, spherical gaseous detonations, direct blast initiation, critical tube diameter, no-slip walls, Flame acceleration, critical energy, air mixtures, unstable detonations, velocity deficits, annular channels |
| An innovative and comprehensive approach for the consequence analysis of liquid hydrogen vessel explosions |
2020 |
Journal Article |
F. Ustolin, N. Paltrinieri, G. Landucci |
bleve, Hydrogen safety, consequence analysis, liquid hydrogen, hydrogen explosion, fireball, blast-wave, bleve, overpressure, energy, systems, superheat, limit, velocity, hazards, Safety |
| Analysis of heat transfer of spilling fire spread over steady flow of n-butanol fuel |
2020 |
Journal Article |
A. Lach, A. Gaathaug |
n-butanol fuel, spilling fire, steady flow, subsurface flow, heat transfer, flame spread, pool fires, Temperature, behaviors, alcohols, diesel |
| BEHAVIOUR OF POLYMERS IN HIGH PRESSURE ENVIRONMENTS AS APPLICABLE TO THE HYDROGEN INFRASTRUCTURE |
2016 |
Conference Paper |
N. Menon, A. Kruizenga, K. Alvine, C. San Marchi, A. Nissen, K. Brooks |
polymers, high pressure hydrogen environment, hydrogen infrastructure, FCVs, pressure gradients, test methodologies, polymer properties |
| Blast wave from a hydrogen tank rupture in a fire in the open: Hazard distance nomograms |
2020 |
Journal Article |
T. Wang, C. Wang, S. Rui, K. Pan |
Hydrogen, storage, rupture, blast wave, combustion, engineering tool |
| Catalytic activity of Pd-Ni in the oxidation of hydrogen for the safety of nuclear power plant |
2016 |
Journal Article |
D. Lomot, Z. Karpinski |
palladium, palladium-nickel, catalyst, hydrogen oxidation, palladium-nickel catalysts, supported palladium, surface, reactivity, hydrodechlorination, alloys |
| Center for Hydrogen Safety Signs MoU with South Korea's Gangwon Technopark |
2020 |
Journal Article |
S. Li, J. Long, P. Sui, Z. Hou, R. Chahine, J. Xiao |
Engineering |
| CFD simulation and experimental study of a hydrogen leak in a semi-closed space with the purpose of risk mitigation |
2020 |
Journal Article |
A. Malakhov, A. Avdeenkov, M. Toit, D. Bessarabov |
hydrogen leakage, forced ventilation, Hydrogen safety, cfd simulation, star-ccm, computational fluid-dynamics, Safety, dispersion, scenarios, release, air |
| Characteristics of flame velocity and burning rate of large-scale continuous leakage spilling fire of n-butanol fuel |
2023 |
Journal Article |
Manhou Li, Ranran Li, Changjian Wang |
Large-scale spilling fire, steady flow, Velocity of spilling fire, mass, burning rate, heat transfer analysis, mass-transfer coefficient, interfacial area, bubble-size, spread, evaporation, behaviors, gasoline, diesel, Energy & Fuels, Engineering |
| Comparative study of anion exchange membranes for low-cost water electrolysis |
2020 |
Journal Article |
S. Cho, K. Kim, W. Kim, S. Choi |
anion exchange membrane, water electrolysis, hydrogen production, Hydrogen safety, sustanion, aemion, earth abundant electrocatalysts, hydrogen evolution reaction, fuel-cell, polymer electrolytes, alkaline-medium, recent progress, low-temperature, performance, catalyst, fabrication |
| Comparative study of water droplet interactions with molten lead and tin |
2020 |
Journal Article |
C. Wang, C. Wang, B. Chen, D. Lin, M. Li, Z. Shen |
water droplet, molten lead, molten tin, stream explosion, maximum crown height, vapor explosions, thermal interaction, steam explosion, liquid droplet, accident, surface, pool, Temperature, impact, metal |
| Computational fluid dynamics simulations of hydrogen releases and vented deflagrations in large enclosures |
2020 |
Journal Article |
I. Tolias, S. Giannissi, A. Venetsanos, J. Keenan, V. Shentsov, D. Makarov, S. Coldrick, A. Kotchourko, K. Ren, O. Jedicke, D. Melideo, D. Baraldi, S. Slater, A. Duclos, F. Verbecke, V. Molkov |
Hydrogen safety, inhomogeneous mixtures, stratified mixtures, large enclosures, vented hydrogen deflagrations, computational fluid dynamics, Explosions, cfd, mixtures, models |
| Design fatigue life evaluation of high-pressure hydrogen storage vessels based on fracture mechanics |
2016 |
Journal Article |
C. Zhou, Z . Y. Li, Y. Zhao, Z. Hua, K. Ou, L. Zhang, M. Wen, P. Xu |
fatigue life, hydrogen embrittlement, hydrogen storage vessels, fracture mechanics, Hydrogen safety, austenitic stainless-steels, embrittlement |
| Development of a novel cooking stove based on catalytic hydrogen combustion |
2016 |
Journal Article |
B. Fumey, S. Stoller, R. Fricker, R. Weber, V. Dorer, U. Vogt |
catalytic hydrogen combustion, hydrogen based cooking, gas under glass technology |
| Development of design a drop-in hydrogen fueling station to support the early market buildout of hydrogen infrastructure |
2016 |
Journal Article |
M. West, A. Al-Douri, K. Hartmann, W. Buttner, K. Groth |
h-2 fueling station, renewable energy, sustainable energy, local energy source, green energy, energy saving, technologies |
| Dispersion and behavior of hydrogen for the safety design of hydrogen production plant attached with nuclear power plant |
2020 |
Journal Article |
J. Lee, S. Cho, H. Cho, S. Cho, I. Lee, I. Moon, J. Kim |
hydrogen leak, nuclear power plant, hydrogen jet, flammability, leak detection, storage, energy |
| Dispersion of hydrogen release in a naturally ventilated covered car park |
2020 |
Journal Article |
J. Wang, X . Y. Zhao, L. Gao, X. Wang, Y. Zhu |
unignited release, indoor dispersion, covered car park, Hydrogen safety, release angle, natural ventilation, safety assessment, pressure peaking, simulation, enclosure |
