Skip to main content

HYDROGEN GENERATION CAN REDUCE NEW PLANT DESIGN AND BUILDING COSTS

Type of Publication
Year of Publication
2014
Authors

D.E. Wolff; W. Bailey; T. Skoczylas;

ISBN Number

978-0-7918-5605-5

Abstract

Large electric power plant generators typically use gaseous hydrogen to remove heat from the generator windings and deliver the heat to the cooling water. Hydrogen is used in a closed cycle, and only a modest amount of makeup hydrogen is used daily to make up for hydrogen losses typically about 300 to 700 scf/d. The range of hydrogen usage depends on several factors. In addition to hydrogen used for makeup, all power plants using hydrogen-cooled generators must plan for hydrogen supply to re-gas a generator after the generator has been degassed. Typical generator re-gas quantities are in the range of 15x the daily makeup amount, and must be available in a short period of time. Thus a generator which might require 300 to 700 scf of hydrogen over 24 hours for daily makeup may require 4500 to 10,500 scf of hydrogen in just a few hours for re-gas. The re-gas hydrogen is added back to the generator as quickly as the re-gas process allows typically over 3-5 hours so that an out-of-service generator can be brought online and producing revenue again. Hydrogen for power plant generator cooling can be supplied either through hydrogen delivered to the plant from a remote source in gaseous or liquid form, or can be made at the plant using an on-site hydrogen generator. Makeup hydrogen and re-gas hydrogen do not necessarily require the same source of hydrogen because the requirements of re-gas hydrogen are very different from the requirements of makeup hydrogen, it may be more efficient to use two different approaches. On-site hydrogen generation for power plant hydrogen supply is widespread in the developing world, and is beginning to displace delivered hydrogen as the preferred approach in the U.S., Canada and Europe. Outside U.S., Canada and Europe, there may be no delivery infrastructure for hydrogen manufacture and delivery to the plant a hydrogen-cooled power plant may need to take care of its own hydrogen needs to ensure that the plant can be operated. In the U.S., Canada and Europe hydrogen deliveries are available, but on-site generated hydrogen is gaining acceptance because it reduces costs and operational complexity, and improves safety. This paper will review several cases where on-site hydrogen generation has been used to reduce the cost of design, construction and operation of newly built power plants, both in the U.S., Canada and Europe and in areas where hydrogen is far less available.

DOI

V001t04a001

Notes

Times Cited: 0 ASME Power Conference 2013 Jul 29-aug 01, 2013 Boston, MA ASME, Power Div 0

We are professional and reliable provider since we offer customers the most powerful and beautiful themes. Besides, we always catch the latest technology and adapt to follow world’s new trends to deliver the best themes to the market.

Contact info

We are the leaders in the building industries and factories. We're word wide. We never give up on the challenges.

Recent Posts