Commissioning of cryogenic system for China Spallation Neutron Source |
2017 |
Conference Paper |
B. Ye, C. He, N. Li, M . Y. Ding, Y. Wang, Y. Zhang, K. He |
china spallation neutron source, cryogenic system, commissioning |
Comparative study of regulations, codes and standards and practices on hydrogen fuelling stations |
2017 |
Journal Article |
S. Pique, B. Weinberger, V. De-Dianous, B. Debray |
hydrogen fuelling stations, regulations, codes, standards, practices |
Comparison of helium and hydrogen releases in 1 m and 2 m two vents enclosures: Concentration measurements at different flow rates and for two diameters of injection nozzle |
2017 |
Journal Article |
G. Bernard-Michel, D. Houssin-Agbomson |
Safety, helium, Hydrogen, similitude, Fuel cells, natural ventilation, fluid-mechanics, convection |
Comparison of single droplet impact behaviors on the burning shallow/deep pool |
2019 |
Journal Article |
X. Fan, C. Wang, X. Wang, M. Li, Z. Shen |
fire safety, droplet impact, liquid depth, burning pool regimes, boiling regimes, weber number, heptane pool, liquid, Temperature |
Comparison of two-layer model for hydrogen and helium jets with notional nozzle model predictions and experimental data for pressures up to 35 MPa |
2017 |
Journal Article |
X. Li, D. Christopher, E. Hecht, I. Ekoto |
Hydrogen safety, underexpanded jets, notional nozzle models, flow partitioning, decay, gas |
Comparisons of experimental measurements and large eddy simulations for a helium release in a two vents enclosure |
2019 |
Journal Article |
G. Bernard-Michel, E. Saikali, A. Sergent, C. Tenaud |
Hydrogen, Safety, vents, dispersion, piv, les, dispersion, Ventilation |
Comparisons of hazard distances and accident durations between hydrogen vehicles and CNG vehicles |
2019 |
Journal Article |
Z . Y. Li, Y . Y. Luo |
hazard distances, accident durations, impinging jet fires |
Composite gas cylinders - Probabilistic analysis of minimum load cycle requirements |
2017 |
Journal Article |
G. Mair, B. Becker, E. Duffner, H. Saul, A. Schoppa |
cycle strength, degradation, end of life, lucky punch area, slow burst test, statistical assessment, residual strength |
Consequence models for vented hydrogen deflagrations: CFD vs engineering models |
2019 |
Journal Article |
S. Lakshmipathy, T. Skjold, H. Hisken, G. Atanga |
vented deflagrations, venting configurations, cfd, engineering models, hysea project, explosion overpressures, capabilities, Detonation, transition, exercise |
Determination of underexpanded hydrogen jet flame length with a complex nozzle geometry |
2019 |
Journal Article |
M. Henriksen, A. Gaathaug, J. Lundberg |
hydrogen jet flame, nozzle geometry, safety engineering, jet flame length, image processing, high-pressure |
Detonation wave propagation in semi-confined layers of hydrogen-air and hydrogen-oxygen mixtures |
2017 |
Journal Article |
J. Grune, K. Sempert, A. Friedrich, M. Kuznetsov, T. Jordan |
detonation limits, Hydrogen, semi-open channel, concentration gradients, critical height, critical concentration |
Development and Performance Evaluation of Energy Efficient PEM Fuel Cell Electric Vehicle for Smart Cities |
2017 |
Conference Paper |
S. Chavan, D. Talange, |
pem fuel cell, MEA, methanol, reactor |
Development of a mitigation system against hydrogen-air deflagrations in nuclear power plants |
2019 |
Journal Article |
H. Saitoh, T. Otsuka, N. Yoshikawa, N. Kanno, S. Takanashi, Y. Oozawa, M. Hirata, M. Takeshita, K. Sakuragi, S. Kurihara, Y. Tsunashima, N. Aoki, K. Tanaka |
mitigation, hydrogen explosion, nuclear power plant, severe accident, deflagration, flame arrester |
Development of a model evaluation protocol for CFD analysis of hydrogen safety issues the SUSANA project |
2017 |
Journal Article |
D. Baraldi, D. Melideo, A. Kotchourko, K. Ren, J. Yanez, O. Jedicke, S. Giannissi, I. Tolias, A. Venetsanos, J. Keenan, D. Makarov, V. Molkov, S. Slater, F. Verbecke, A. Duclos |
hymep, model evaluation protocol, cfd, Hydrogen safety, susana project, validation and verification, databases, dispersion models, exercise, Garage, capabilities, combustion, release, predict, smedis, code, gas |
Development of regulations, codes and standards on composite tanks for on-board gaseous hydrogen storage |
2019 |
Journal Article |
D. Wang, B. Liao, J . Y. Zheng, G. Huang, Z. Hua, C. Gu, P. Xu |
regulations, codes and standards, composite tanks, gaseous hydrogen storage, Hydrogen safety, acoustic-emission, temperature rise, iii cylinder, Pressure, sensors, rubber |
Dynamics of ignition of stoichiometric hydrogen-air mixtures by moving heated particles |
2017 |
Journal Article |
J. Melguizo-Gavilanes, S. Coronel, R. Mevel, J. Shepherd |
hot particle ignition, industrial safety, aircraft safety, Numerical simulation, Hydrogen, explosive atmospheres, combustible mixture, inflammable gases, hot particles |
Editors' Choice—Field Trials Testing of Mixed Potential Electrochemical Hydrogen Safety Sensors at Commercial California Hydrogen Filling Stations |
2017 |
Journal Article |
Eric Brosha, Christopher Romero, Daniel Poppe, Todd Williamson, Cortney Kreller, Rangachary Mukundan, Robert Glass, Amanda Wu |
oxide electrodes, ysz electrolyte, gas sensors, prototype, Electrochemistry, Materials Science |
Effect of ignition position on vented hydrogen-air deflagration in a 1 m(3) vessel |
2019 |
Journal Article |
H. Li, S. Rui, J. Guo, X. Sun, G. Li, J. Zhang |
Hydrogen, vented explosion, pressure oscillation, flame, Safety, explosion overpressures, cylindrical rig, gas explosion, Pressure, gasdynamics, mitigation, location, ducts, size, cfd |
EFFECT OF MESH RESOLUTION AND BUOYANCY-DRIVEN FLOWS ON THE k - epsilon TURBULENCE MODELS USING THE HYDRAGON CODE |
2017 |
Conference Paper |
M. Saeed, J . Y. Yu, X. Zhong, B. Hou, X. Zhang, M. Ghazanfar, G . Y. Liu, C. Yang, |
nuclear power plant, turbulence models, cfd simulation, containment |
Effect of orifice plates spaces on flame propagation in a square cross-section channel |
2019 |
Journal Article |
Q. Li, S. Lu, C. Wang |
Hydrogen, orifice plates, separation distance, jet flame, pressure difference, hydrogen-air mixtures, burning velocities, shock interactions, perforated plate, acceleration, combustion, gas, Detonation, wave, transition |
Effect of plastic deformation at room temperature on hydrogen diffusion of S30408 |
2019 |
Journal Article |
W. Qu, C. Gu, J . Y. Zheng, Y. Zhao, Z. Hua |
s30408, hydrogen embrittlement, hydrogen diffusion, plastic deformation, thermal desorption spectroscopy, fatigue-crack growth, martensitic transformations, stainless-steels, permeation, embrittlement, transport, nickel, permeability, desorption, Solubility |
Effect of Pt/TiO2 interface on room temperature hydrogen sensing performance of memristor type Pt/TiO2/Pt structure |
2017 |
Journal Article |
Azhar Haidry, Andrea Ebach-Stahl, Bilge Saruhan |
hydrogen sensors, pt/tio2/pt, memristor, metal/semiconductor interface, conducting filaments, switching mechanism, gas, sensors, tio2, electrodes, anatase, h-2, au |
Effects of hydrogen concentration and film thickness on the vented explosion in a small obstructed rectangular container |
2019 |
Journal Article |
X. Wang, C. Wang, X. Fan, F. Guo, Z. Zhang |
Hydrogen safety, explosion venting, overpressure, hydrogen concentration, film thickness, flame propagation, air mixtures, burst pressure, overpressures, obstacle, deflagration |
Enhancing safety of hydrogen containment components through materials testing under in-service conditions |
2017 |
Journal Article |
B. Somerday, J. Campbell, K. Lee, J. Ronevich, C. Marchi |
high pressure hydrogen, Materials Testing, steels |
Estimation of final hydrogen temperature from refueling parameters |
2017 |
Journal Article |
J. Xiao, P. Benard, R. Chahine |
Hydrogen storage, refueling, fast filling, thermodynamics, Temperature, rule of mixtures, charge-discharge cycle, fast filling simulations, storage-system, 70 mpa, iii cylinder, vehicle cylinder, tanks, model, rise, thermodynamics |