Effect of Pt/TiO2 interface on room temperature hydrogen sensing performance of memristor type Pt/TiO2/Pt structure |
2017 |
Journal Article |
Azhar Haidry, Andrea Ebach-Stahl, Bilge Saruhan |
hydrogen sensors, pt/tio2/pt, memristor, metal/semiconductor interface, conducting filaments, switching mechanism, gas, sensors, tio2, electrodes, anatase, h-2, au |
Effect of solid obstacle distribution on flame acceleration and DDT in obstructed channels filled with hydrogen-air mixture |
2022 |
Journal Article |
J. Wang, X . Y. Zhao, L. Gao, X. Wang, Y. Zhu |
Flame acceleration, ddt, Detonation, combustion, openfoam, to-detonation transition, numerical-simulation, arc obstacles, deflagration, mechanism |
Effect of the liquid temperature on the interaction behavior for single water droplet impacting on the immiscible liquid* |
2021 |
Journal Article |
I. Yasnev, A. Mel'nichenko, V. Gurskii |
droplet impact, crater-jet, weber number, immiscible liquid, pool temperature, weber number, regimes |
Effect of vent area on the vented methane-air deflagrations in a 1 m3 rectangular vessel with and without obstacles |
2022 |
Journal Article |
L. Yabing, L. Xianghui, C. Peng, X. Deyang |
methane, explosion venting, Safety, helmholtz oscillation, large-eddy simulation, gas-explosions, hydrogen deflagration, gaseous, Explosions, spherical vessels, burst pressure, ignition, flame, leakage, overpressures, Engineering |
Effects of congestion and confining walls on turbulent deflagrations in a hydrogen storage facility-part 1: Experimental study |
2018 |
Journal Article |
L. Shirvill, T. Roberts, M. Royle, D. Willoughby, P. Sathiah |
Hydrogen safety, refuelling stations, Hydrogen storage, high-pressure releases, hydrogen mixtures with air, ignition, refueling station, risk analysis, dispersion |
Effects of flow velocity on ignition characteristics of hydrogen recombination catalyst |
2021 |
Journal Article |
T. Tamba, K. Okada, H. Kubo, S. Kato, Y. Oshima, T. Matsunaga |
hydrogen recombination catalyst, passive autocatalytic recombiner, Hydrogen safety, ignition |
Effects of gamma irradiation on hydrogen gas-sensing characteristics of Pd–SnO2 thin film sensors |
2015 |
Journal Article |
Nguyen Van Duy, Trinh Toan, Nguyen Hoa, Nguyen Van Hieu |
h-2 gas sensor, Sputtering, sno2, Pd islands, Wafer-scale fabrication, electrical-properties, zno, radiation, cuo, nanoparticles, nanotube, islands |
Effects of hydrogen concentration and film thickness on the vented explosion in a small obstructed rectangular container |
2019 |
Journal Article |
X. Wang, C. Wang, X. Fan, F. Guo, Z. Zhang |
Hydrogen safety, explosion venting, overpressure, hydrogen concentration, film thickness, flame propagation, air mixtures, burst pressure, overpressures, obstacle, deflagration |
Effects of ignition location, obstacles, and vent location on the vented hydrogen-air deflagrations with low vent burst pressure in a 20-foot container |
2020 |
Journal Article |
X. Luo, C. Wang, S. Rui, Y. Wan, Z. Zhang, Q. Li |
vented hydrogen-air deflagrations, overpressure, 20-foot container, Hydrogen safety, explosion overpressures, Flame acceleration, gasdynamics |
Effects of thermal radiation heat transfer on flame acceleration and transition to detonation in particle-cloud hydrogen flames |
2015 |
Journal Article |
M. Liberman, M. Ivanov, A. Kiverin |
Thermal radiation, Flame acceleration, Detonation, dust explosion, Hydrogen safety, propagating flame, gaseous-mixtures, knock occurrence, coal-dust, deflagration, ignition, ddt, simulation, channels |
Effects of tubes with different inlet shapes on the shock wave and self-ignition induced by accidental release of pressurized hydrogen |
2022 |
Journal Article |
T. Zhang, Y. Jiang, X. Pan, Z. Wang, Q . Y. Wang, Y . Y. Li, L. Ta, M. Hua, J. Jiang |
Hydrogen safety, self-ignition, shock waves, inlet areas, inlet shapes, flame propagation, diaphragm shape, rupture rate, simulation, diffusion, dynamics |
Electrochemical Reduction of Gaseous CO2 at Low-Intermediate Temperatures Using a Solid Acid Membrane Cell |
2022 |
Journal Article |
K. Alanne |
carbon dioxide, electrochemical reduction, gas phase, solid acids, low temperatures, carbon-dioxide, metal-electrodes, artificial photosynthesis, conversion, water, Catalysis, Hydrogen |
Emergency blower ventilation to disperse hydrogen leaking from a hydrogen-fueled vehicle |
2015 |
Journal Article |
E. Saikali, A. Sergent, Y. Wang, P. Le Quere, G. Bernard-Michel, C. Tenaud |
Hydrogen safety, fuel cell vehicles, emergency response procedures, vehicle accidents |
Empirical profiling of cold hydrogen plumes formed from venting of LH storage vessels |
2021 |
Journal Article |
W. Buttner, M. Ciotti, K. Hartmann, K. Schmidt, H. Wright, E. Weidner |
hydrogen sensors, Safety, wide area monitor, lh2, nfpa 2, Hydrogen storage |
Enhancing safety of hydrogen containment components through materials testing under in-service conditions |
2017 |
Journal Article |
Y. Gao, B. Zhang, H. Ng, J. Lee |
high pressure hydrogen, Materials Testing, steels |
Environmental aspects of fuel cells: A review |
2021 |
Journal Article |
M. Abdelkareem, K. Elsaid, T. Wilberforce, M. Kamil, E. Sayed, A. Olabi |
Environmental aspects of FCs, Environmental impacts of energy conversion devices, Fuel cells, Fuel conversion devices |
Erratum to “CFD analysis of fast filling strategies for hydrogen tanks and their effects on key-parameters” [Int. J. Hydrogen Energy 40 (2015) 735–745] |
2015 |
Journal Article |
A. Prabhakar, N. Agrawal, V. Raghavan, S. Das |
|
Estimation of Critical Conditions for Deflagration-to-Detonation Transition in Obstructed Channels Filled with Gaseous Mixtures |
2018 |
Journal Article |
A. Kiverin, I. Yakovenko |
deflagration-to-detonation transition, chocked flames, gaseous combustion, obstructed channels, Hydrogen safety, flame-acceleration, Hydrogen, mechanism, ddt, propagation, initiation, ignition, smooth |
Estimation of final hydrogen temperature from refueling parameters |
2017 |
Journal Article |
I. Tolias, A. Venetsanos |
Hydrogen storage, refueling, fast filling, thermodynamics, Temperature, rule of mixtures, charge-discharge cycle, fast filling simulations, storage-system, 70 mpa, iii cylinder, vehicle cylinder, tanks, model, rise, thermodynamics |
Evaluating the temperature inside a tank during a filling with highly-pressurized gas |
2015 |
Journal Article |
T. Bourgeois, F. Ammouri, M. Weber, C. Knapik |
hydrogen dispenser, temperature estimator, soft-sensor, Modeling, Safety, filling, heat-transfer coefficients, Hydrogen, cylinder, rise, vessels |
Exfoliated single-walled carbon nanotube-based hydrogen sensor |
2008 |
Journal Article |
Krishna Kumar, Leela Reddy, S. Ramaprabhu |
|
Experiment study on the pressure and flame characteristics induced by high-pressure hydrogen spontaneous ignition |
2020 |
Journal Article |
M. Schiavetti, M. Carcassi |
Hydrogen safety, high-pressure storage, self-ignition, hydrogen combustion, shock wave, self-ignition, tube, release, jet, propagation, dynamics, gas, visualization, combustion, Explosion |
Experimental and modelling study on flame tilt angle of flame spread over jet fuel under longitudinally forced air flows |
2020 |
Journal Article |
C.D. Barley, K. Gawlik, J. Ohi, R. Hewett |
flame tilt angle, flame spread, jet fuel, longitudinal air flow, modelling study, blown pool fire, crude-oil, burning characteristics, combustion, geometry, diesel |
Experimental and numerical study of light gas dispersion in a ventilated room |
2015 |
Journal Article |
T. Gelain, C. Prevost |
tracer gases |
Experimental and numerical study on the effect of low vent burst pressure on vented methane-air deflagrations |
2021 |
Journal Article |
G. Xiao, S. Wang, H. Mi, F. Khan |
vented explosion, pressure oscillation, methane-air mixtures, Safety |