Summary report of the Clean Hydrogen Joint Undertaking Expert Workshop on the Environmental Impacts of Hydrogen

Contents 1 Climate Change Policy Objective 2 Hydrogen Flexibility 3 Hydrogen Production and Sources4 Hydrogen Properties5 Hydrogen Safety Codes and Standards Overview6 UK Hydrogen Blending Demo Approval7 US Hydrogen Blending Concept8 Pipeline Integrity9 Gas Composition Standards10 Pipeline Standards11 Hydrogen Safety Utilization 12 Conclusion 

The adoption of hydrogen (H²) as a clean, zero-carbon renewable energy source promises a global revolution, eliminating harmful emissions responsible for climate change. This white paper explores the opportunities and implications of an emerging hydrogen society. MSA Safety examines workplace safety risks and challenges posed when producing, handling, transporting, and storing alongside suggested best practices, safety measures, and detection technologies.

An under-expanded hydrogen jet from high-pressure equipment or storage tank is a potential incident scenario. Experiments demonstrated that the delayed ignition of a highly turbulent under-expanded hydrogen jet generates a blast wave able to harm people and damage property. There is a need for engineering tools to predict the pressure effects during such incidents to define hazard distances. The similitude analysis is applied to build a correlation using available experimental data.

This document applies to the recovery phase of a typical emergency management framework that includes planning, response, mitigation, and recovery. This document provides practical guidance with a checklist to help an organization recover from a hydrogen incident and return to normal operations after the event scene has been stabilized and returned to the organization by the incident commander. This document does not include activities related to the immediate emergency response and initial investigations performed by other entities.

VIII.10  Hydrogen Safety Panel

The Hydrogen Safety Panel was tasked with conducting work under the project “Hydrogen Safety Panel Review of Department of Energy’s Fuel Cell Projects,” through memorandum purchase order DCO-0-40618-01 with the National Renewable Energy Laboratory using American Recovery and Reinvestment Act (ARRA) funding.  Panel members reviewed project safety plans, conducted safety review site visits for selected projects, and prepared safety evaluation reports for the sites visited that included safety recommendations for the project teams.

Quenching limits of hydrogen diffusion flames on small burners were observed. Four burner types,with diameters as small as 8 m, were considered: pinhole burners, curved-wall pinhole burners, tubeburners, and leaky fittings. In terms of mass flow rate, hydrogen had a lower quenching limit and a higherblowoff limit than either methane or propane. Hydrogen flames at their quenching limits were the weakest