On March 11, 2024, the U.S. Environmental Protection Agency (EPA) published the much-anticipated Safer Communities by Chemical Accident Prevention Rule (SCCAP) Final Rule, an update to EPA’s Risk Management Program (RMP) 40 CFR Part 68, under the Clean Air Act Amendments of 1990 (CAA). This is the first substantial change to the rule since its inception in 1996.

The "draft" technical paper provides a brief gap analysis of the Codes and Standards for Delayed Ignition with a focus on discharge of warm gas and thermal radiation and impingement.

The "draft" report briefly discusses two distinctly different scenarios that create overpressure from an external release of hydrogen into an ambient air environment: Delayed ignition from a pressurized release and Delayed ignition of a flammable gas cloud.

State policy targets on greenhouse gas emission reductions and other decarbonization initiatives are creating a movement toward low or zero-carbon gases and fuels. Given its versatility as an energy carrier and its potential for use in a broad range of applications, hydrogen is gaining in popularity, and natural gas providers are looking at integrating it into their networks.

Safe practices in the production, storage, distribution, and use of hydrogen are essential for the widespread acceptance of hydrogen and fuel cell technologies. A catastrophic failure in any hydrogen project could damage public perception of hydrogen and fuel cells. Given the nascent nature of the mobile hydrogen applications, incidents involving mobile equipment can have detrimental impacts for the public as well as stakeholders and project proponents who are committed to hydrogen’s use as a safe alternative energy resource. 

Summary report of the Clean Hydrogen Joint Undertaking Expert Workshop on the Environmental Impacts of Hydrogen

The adoption of hydrogen (H²) as a clean, zero-carbon renewable energy source promises a global revolution, eliminating harmful emissions responsible for climate change. This white paper explores the opportunities and implications of an emerging hydrogen society. MSA Safety examines workplace safety risks and challenges posed when producing, handling, transporting, and storing alongside suggested best practices, safety measures, and detection technologies.

This document applies to the recovery phase of a typical emergency management framework that includes planning, response, mitigation, and recovery. This document provides practical guidance with a checklist to help an organization recover from a hydrogen incident and return to normal operations after the event scene has been stabilized and returned to the organization by the incident commander. This document does not include activities related to the immediate emergency response and initial investigations performed by other entities.

This report provides an evaluation by members of the Hydrogen Safety Panel (HSP) of the June 1, 2019 hydrogen release incident at the Air Products and Chemicals Inc. (Air Products) hydrogen trailer transfill (transfill) facility located in Santa Clara, California. This review was requested by the California Energy Commission (CEC) in May 2020 and examines data from Air Products, and the Santa Clara Fire Department to provide an HSP perspective on the incident cause, response, and recommended follow-up actions. 

This document provides an example safety plan in Attachment A associated with hydrogen and fuel cells, where there is a significant flammability or explosive hazard from quantities, pressures, exposures, or other conditions. Hydrogen is unique among flammable gases in that small quantities may result in ignition or explosions. This example safety plan was developed by Pacific Northwest National Laboratories (PNNL) and its Hydrogen Safety Panel (HSP) members to assist entities working with hydrogen to ensure the protection of life, property, and the environment.