A researcher was using numerous compressed gases in his lab. To facilitate reconfiguring his experimental apparatus, he installed "quick-disconnect" fittings on flexible tubing connected to his compressed gas cylinders/regulators. He also fitted all of the equipment that needed gas with complementary "quick-disconnect" fittings.

The day of the incident, he needed to purge his IR spectrometer with nitrogen as the element heated up. He mistakenly attached the "quick-disconnect" fitting from a cylinder of 10% nitrogen and 90% hydrogen to the "quick-disconnect" fitting on his spectrometer. As soon as the gas started flowing and he switched on the element, the instrument exploded, completely destroying a $6,000 piece of equipment. Only minor view more

A researcher was unplugging an electrical cord when 1/8-inch copper tubing supplying nitrogen to a gas chromatograph came in contact with the energized electrical plug, causing an electrical arc. This caused a hole in the copper tubing. A nearby hydrogen line was unaffected.

The bottled gas supply was shut off. Craftsmen were brought in to reinstall the copper tubing, at a safe distance from the electrical outlet.

Incident Synopsis
While disconnecting a liquid H2 fill line from a liquid H2 trailer, liquid H2 escaped, burning a second man who was holding the hose. The man was burned on his hands and on his stomach.

The liquid H2 shut off valve was partially open, but both men assumed it was closed. Prescribed clothing was being worn.

Incident Synopsis
At an offsite liquid H2 fill station, a liquid hydrogen trailer hit a gaseous H2 purge shut off valve handle. Tubing attached to the purge valve was bent on both ends but did not leak.

The driver was not sufficiently careful in approaching the liquid H2 system fill point.

A small electrical fire occurred (due to what is believed to be an electrical short circuit) inside a fuel cell test stand. Subsequently, a nearby hydrogen line made of flexible tubing was melted through and ignited the hydrogen, causing a small fire.

The electrical fire was easily extinguished. The hydrogen flame was extinguished by snuffing the flame, shutting off the gas lines and power to the test stand. No one was injured, but damage was incurred in the test stand.


An electrical short circuit occurred, causing a small electrical fire.
Electrical fire caused a flexible tubing hydrogen line to melt, thus exposing hydrogen to the fire.

A pinhole at the base of a hand-held hydrogen torch, allowed hydrogen to leak. In the process of lighting a second torch, the leaking hydrogen was ignited. The operator, being startled by the "pop" of the lighted hydrogen allowed the #2 torch to drop and hang by its hose support approximately 6" from the floor. The hydrogen and oxygen hoses on the #1 torch were burned through and hung approximately 12" from the floor. The free burning #1 hose burned the #2 hydrogen and oxygen hose assembly through, causing both hoses assemblies to burn without valve control. The hose size is 1/4" and is used in various areas of the plant.

While filling a sample cylinder with compressed hydrogen gas, a quick-disconnect coupler fitting came loose within a stainless steel laboratory hood, allowing a small purge of the hydrogen gas to escape directly into the hood through ~1/4-inch Tygon tubing. The stainless steel quick-disconnect fitting struck the stainless steel bottom of the laboratory hood and the hydrogen gas caught fire. It is not known what caused the hydrogen gas to catch fire. The most likely sources of a spark was from metal-to-metal contact of the quick-disconnect fitting with the laboratory hood floor, or the discharge of static electrical charge generated by flow of hydrogen gas through Tygon tubing. The resultant narrow jet of fire, directed toward the left side of the laboratory hood, extinguished itself view more

A facility uses small crucibles to heat precious metals within a fume hood, with natural gas as the fuel source for the Bunsen burner. Hydrogen is fed into the crucible at low pressure (<20 psi) to control the atmosphere within the vessel in order to prevent oxidation. The hydrogen is routed through a manifold with flexible tubing, which is connected to a ceramic tip and fitted into the crucible through a small opening in the crucible's lid. The hydrogen is consumed in the process. The facility believes that the hydrogen tubing developed a leak which eventually ignited. The plastic interior of the fume hood ignited and started to spread. The person working in the area shut off the natural gas and hydrogen (they had valves at the hood) and used a halon extinguisher in the view more