A health physics technician (HPT) discovered that a scaler in an analytical laboratory was out of P-10 gas (90%Ar and 10% CH4). The HPT went to the building where auxiliary gas cylinders are stored. He located a P-10 gas cylinder and turned to search for a hand-cart. There were no hand-carts present, and the technician had to get one from another room. When he returned to the cylinder storage area, he loaded the wrong cylinder. It contained hydrogen gas instead, however, the two cylinders were next to each other and they were basically identical. The empty cylinder was then replaced by the full one and the scaler was purged for several minutes before it was used. The alpha channel worked well, however, the beta channel did not respond. An instrument technician was contacted to identify view more
A technician accidentally loosened critical bolts holding a fitting to the top of an H2 tank, which caused a large hydrogen leak in the dewar. The fitting contained various instruments, and upon loosening the third bolt, H2 gas exited through an opening in the seal. The Viton or neoprene O-ring was blown out of its groove and was immediately frozen, making it impossible to reseal the fitting cover. The area was evacuated, the dewar was vented and the gasket was replaced. The ullage space was not purged with helium gas during the gasket replacement, which may have been responsible for small leaks which developed during the transfer.
The fitting containing the instruments was mounted on a flange, which was in turn secured to another flange. view more
A small research sample of approximately 5 grams of aluminum hydride (alane) doped with 2-3 mol % TiCl3 contained within a glass ampoule ruptured after transit while stored in an office cabinet. The rupture was attributed to over-pressurization caused by hydrogen gas buildup within the sample over a four-month period. The glass ampoule, contained within a 0.2-inch thick cardboard shipping tube, was not a pressure-rated container. The rupture resulted in glass chards penetrating the protective cardboard shipping tube. The aluminum hydride, a fine powder, was released from the shipping tube during the pressure release. The fine aluminum powder leaked from the cabinet and set off a local smoke alarm that brought emergency responders to the scene. No personnel were present in the area when view more